Electrical · Electrical
Replace a Blown LED Globe
Repair summary
Replacing a screw-in or bayonet LED globe is one of the few electrical jobs Australians can legally DIY. Switch the light off, let the old globe cool, and swap like for like — match the cap (E27, B22, GU10), wattage equivalent and colour temperature.
Likely issue
Failed LED driver inside the globe
DIY difficulty
1/5
Estimated DIY cost
$5–$20
Estimated tradie cost
$120 (callout)
Tools required
- Step ladder
- Cloth
Materials required
Step-by-step instructions
- Turn the light switch off and note the cap type printed on the old globe.
- Replacing a screw-in or bayonet LED globe is one of the few electrical jobs Australians can legally DIY. Switch the light off, let the old globe cool, and swap like for like — match the cap (E27, B22, GU10), wattage equivalent and colour temperature.
Safety warnings
Never touch a globe that has just blown — it can be hot enough to burn. Hard-wired LED downlights with integrated drivers must be replaced by a licensed electrician.
When to call a tradie
Call a licensed tradie if the work is outside the scope of this guide, involves regulated trades (electrical, gas, structural, waterproofing), or if you discover hidden damage. A professional will typically charge $120 (callout).
Get Quotes
